Digital decoration has made photo-realistic tiles possible. The inks behind it must survive two very different worlds: a precise print head and a kiln above 1,000 °C.
What is in the ink
Ceramic inks are dispersions of inorganic ceramic stains (for example zircon, spinel and other high-temperature pigments) milled to below a micrometre in a non-aqueous carrier. The organic part burns off in firing; the stain develops colour inside the glaze.
Jetting reliability
Recirculating piezo heads need inks with stable particle size, controlled viscosity at the head temperature and no sedimentation in the lines. Hard ceramic particles also abrade, so size distribution and filtration matter.
Colour development
The same ink can look different on two glazes or two firing cycles. Profiles are built by printing test charts on the production glaze and kiln, then creating colour management for the design files. Effect inks add matt, gloss, lustre, metallic or relief effects in the same pass.

