FLYFILL grades and lines
Product description
FLYFILL masterbatches carry surface-treated mineral fillers at high loading in polyolefin carriers, pre-dispersed so the filler distributes evenly at the machine without dust.
Product range
| Code | Filler | Content % | Use |
|---|---|---|---|
| FL-CC-F | Calcium carbonate, fine, coated | 70–80 | Blown film, including thin film |
| FL-CC-R | Calcium carbonate, coated | 75–85 | Raffia, tapes, woven sacks |
| FL-CC-M | Calcium carbonate, coated | 75–85 | Moulding and extrusion |
| FL-TC | Talc | 60–70 | Stiffness in PP moulding |
| FL-BS | Barium sulphate | 70–80 | Density, surface quality, sound damping |
Typical properties
| Property | Typical value | Method |
|---|---|---|
| Carrier | PE or PP, matched to the polymer | — |
| Melt flow rate | Declared per grade | ISO 1133 |
| Moisture | ≤ 0.1 % | Loss on drying |
| Filler top cut (film grades) | d98 ≤ 10 µm | Filler supplier data |
Use
- Dosage
- Film 5–30 %; raffia 10–30 %; moulding 10–40 %
- Trials
- Higher loadings reduce tensile and impact strength: confirm in a trial
- Moisture
- Dry if the bag has been open in humid conditions
Storage and packing
- Storage
- Dry, 5–40 °C
- Shelf life
- 24 months
- Packing
- 25 kg bags; jumbo bags
Regulatory and safety
Food-contact positioning of individual grades to be confirmed.
Values are typical and do not form a specification. Each delivery is released against its certificate of analysis. Test the product under your own conditions before commercial use.



