FLYCHROMA SI

Colour Pastes for Silicone Rubber and Sealants

Pigment pastes in silicone fluid for condensation- and addition-cure silicones, free of substances that inhibit platinum catalysts.

FLYCHROMA SI

Product description

FLYCHROMA SI pastes use polydimethylsiloxane or vinyl-functional silicone as carrier, so they blend into silicone without plasticiser bleed. The formulation contains no sulfur, amine or tin compounds, which poison the platinum catalysts of addition-cure systems.

Composition

Pigment
Heat-stable pigments (section 3)
Carrier
Polydimethylsiloxane; vinyl-terminated silicone in -V grades for addition cure
Rheology
Fumed silica
Excluded
Sulfur, amine and tin compounds

Product range

CodeColourC.I.Note
SI-W6WhitePW 6Opaque sealants
SI-K7BlackPBk 7Glazing and construction sealants
SI-Y42Oxide yellowPY 42Condensation cure; below 180 °C
SI-R101Oxide redPR 101Heat-resistant red
SI-Y184Bismuth vanadate yellowPY 184Bright yellow
SI-R254DPP redPR 254Bright red
SI-C151Phthalo bluePB 15:1—
SI-G7Phthalo greenPG 7—
SI-N24BuffPBr 24Stone and beige
SI-V23Carbazole violetPV 23Shading

Typical properties

PropertyTypical valueMethod
Pigment content20–70 %Gravimetric
Viscosity at 25 °C20,000–100,000 mPa·sBrookfield
Volatile content≤ 1 %150 °C, 1 h
Platinum-cure compatibilityNo cure inhibition at 2 % (target)Cure test in reference RTV-2

Use

Addition
Sealants 0.5–3 %; liquid and solid silicone rubber 1–2 %
Mixing
Mix under vacuum or de-aerate to avoid bubbles
Checks
Cure, adhesion and colour after heat ageing in the customer’s system

Storage and packing

Storage
5–35 °C, closed containers
Shelf life
24 months
Packing
1 kg and 5 kg tins; 25 kg pails

Regulatory and safety

Food-contact silicone grades positioned for BfR Recommendation XV and FDA 21 CFR 177.2600; confirmation per grade required.

Stage: in development.

Values are typical and do not form a specification. Each delivery is released against its certificate of analysis. Test the product under your own conditions before commercial use.