FLYCOAT grades and lines
Product description
FLYCOAT coatings are ammonia-neutralised acrylic and copolymer dispersions applied in-line on flexo and gravure presses. They protect prints, prepare surfaces for printing, seal packs and control release, and dry fast enough for in-line converting.
Product range
| Code | Function | Solids % | Viscosity, s DIN 4 | Key target |
|---|---|---|---|---|
| CT-OPV-G | Gloss OPV for paper and board | 35–40 | 20–30 | Gloss ≥ 70 GU at 60° |
| CT-OPV-M | Matt OPV | 30–35 | 20–30 | Gloss ≤ 15 GU at 60° |
| CT-OPV-S | High-slip, rub-resistant OPV | 35–40 | 20–30 | Static COF 0.20–0.30 |
| CT-PR-F | Adhesion primer for treated films | 25–35 | 18–25 | Tape adhesion 100 % |
| CT-PR-B | Sealing primer for board | 30–40 | 20–30 | Reduced ink absorption |
| CT-HS-E | Heat-seal coating, EVA / acrylic | 40–45 | 25–40 | Seals at 110–140 °C |
| CT-RL | Release coating for cold-seal and label use | 20–30 | 18–25 | Controlled release force |
Viscosity as supplied; adjust with water up to 5 %. Key targets are measured on reference substrates.
Typical properties
| Property | Typical value | Method |
|---|---|---|
| pH at 20 °C | 8.0–9.0 | pH meter |
| Ammonia content | < 0.5 % as NH₃ | Titration |
| Minimum film-forming temperature | Below 15 °C (grade dependent) | MFFT bar |
| Density | 1.02–1.10 g/cm³ | Density cup |
Use
- Application
- Flexo anilox 6–12 cm³/m² (OPV, primer), 15–25 cm³/m² (heat-seal); gravure 40–60 lines/cm
- Drying
- Hot air 60–80 °C; confirm full drying before rewinding or stacking
- Press stability
- Keep pH above 8 with dilute ammonia; do not mix with solvent-based products
- Clean-up
- Water, with a little ammonia; clean before the coating dries on rollers
Storage and packing
- Storage
- 5–35 °C; protect from frost — freezing destroys the dispersion irreversibly
- Handling
- Stir gently before use; keep containers closed to prevent drying
- Shelf life
- 12 months from date of manufacture
- Packing
- 25 kg HDPE pails, 200 kg drums, 1,000 L IBC
Regulatory and safety
Raw materials selected according to the EuPIA Charter.
Food-packaging use requires migration testing on the final structure.
Values are typical and do not form a specification. Each delivery is released against its certificate of analysis. Test the product under your own conditions before commercial use.




