Product description
FLYCHROMA UP pastes contain no styrene, so they add no monomer vapour at the mixing station and keep their viscosity in storage. The ester carrier does not co-cure; addition is kept low to protect cure and water resistance. Pigments are selected for minimum effect on gel time.
Composition
- Pigment
- Single pigments per colour index (section 3)
- Carrier
- Bis(2-ethylhexyl) terephthalate, phthalate-free
- Rheology
- Hydrophilic fumed silica
- Dispersant
- Polymeric
- Styrene
- None
Product range
| Code | Colour | C.I. | Typical use |
|---|---|---|---|
| UP-W6 | White | PW 6 | Gelcoats, sanitary ware |
| UP-K7 | Black | PBk 7 | Greys, black gelcoats |
| UP-Y42 | Oxide yellow | PY 42 | Cream and sand shades |
| UP-R101 | Oxide red | PR 101 | Terracotta, brown |
| UP-Y184 | Bismuth vanadate yellow | PY 184 | Bright yellow |
| UP-O73 | DPP orange | PO 73 | Signal orange |
| UP-R254 | DPP red | PR 254 | Bright red |
| UP-R122 | Quinacridone magenta | PR 122 | Pinks, violets |
| UP-V23 | Carbazole violet | PV 23 | Shading |
| UP-C151 | Phthalo blue | PB 15:1 | Marine blues |
| UP-G7 | Phthalo green | PG 7 | Greens |
| UP-N24 | Buff | PBr 24 | Beige, stone |
Typical properties
| Property | Typical value | Method |
|---|---|---|
| Viscosity at 25 °C | 20,000–80,000 mPa·s | Brookfield |
| Fineness | ≤ 10 µm | Hegman gauge |
| Effect on gel time | Within ± 10 % of uncoloured resin at 3 % paste (target) | Gel timer, cobalt / MEKP |
| Density | 1.1–2.2 g/cm³ | Density cup |
| Shade | ΔE ≤ 1.0 against standard | Cured casting |
Use
- Addition
- Gelcoats 3–5 %; laminating resins 1–3 %; do not exceed 5 %
- Order of addition
- Mix the paste into the resin before accelerator and initiator
- Checks
- Gel time and Barcol hardness in each resin system; carbon black and some organics can shift gel time
Storage and packing
- Storage
- 5–35 °C; keep closed; stir before use
- Shelf life
- 12 months
- Packing
- 1 kg and 5 kg tins; 25 kg pails
Regulatory and safety
Styrene-free and phthalate-free; not classified (provisional).
Values are typical and do not form a specification. Each delivery is released against its certificate of analysis. Test the product under your own conditions before commercial use.



