FLYBATCH

Colour, White, Black and Rubber Masterbatches

Masterbatches on PVC, polyolefin, universal, WPC and rubber carriers, including white and black batches, PVC micro-granulate and FLYCOOL IR-reflective grades.

FLYBATCH

FLYBATCH grades and lines

Product description

FLYBATCH masterbatches are matched to the customer’s polymer, pigment load and granule size. The PVC micro-granulate melts early in the extruder or hot mixer, so it distributes without streaks even at high line speeds and low dosing.

Lines

LineCodeDescription
PVC micro-granulateMB-PVCFine, low-melting granulate for extrusion and hot mixing; high pigment loads for light fastness
PolyolefinMB-POPE and PP carriers for film, moulding and pipes
UniversalMB-UNCarrier for PS, ABS and SAN; suitability confirmed per polymer
Wood-plastic compositesMB-WPCPE and PP carriers with UV protection for decking
WhiteMB-W50–75 % rutile titanium dioxide in PE for film, moulding and sheet
BlackMB-K30–50 % carbon black in PE; MB-K-UV with fine carbon black for pipes and outdoor film
RubberMB-RBPre-dispersed pigments in EPDM or EVA binder for profiles, footwear and foams
Cool colourssuffix -IRFLYCOOL IR-reflective formulations

Typical properties

PropertyTypical valueMethod
Pigment content10–75 %Ash / formulation
Granule sizeMicro 0.5–1.0 mm; standard 2–3 mm cylindersSieve
Moisture≤ 0.1 %Loss on drying
Dosing1–4 % (let-down 1:25 to 1:100)—
ShadeΔE ≤ 1.0 at the stated let-downCIELAB, D65/10°

Use

Dosing
Gravimetric or volumetric dosing at the throat
Compatibility
Use the carrier matched to the polymer; dry hygroscopic carriers as stated per grade
Black for pipes
Dose MB-K-UV to the carbon-black content required by the applicable pipe standard
Rubber batches
Add MB-RB in the internal mixer or on the mill with the polymer

Storage and packing

Storage
Dry, 5–40 °C
Shelf life
24 months
Packing
25 kg bags; octabins

Regulatory and safety

No lead, cadmium or hexavalent-chromium pigments; RoHS-conform pigment selection.

Food-contact grades positioned for EU Regulation 10/2011 and IS 9833; confirmation per grade required.

Values are typical and do not form a specification. Each delivery is released against its certificate of analysis. Test the product under your own conditions before commercial use.